In a funny coincidence, I published an article at SCDSource.com about the need for cycle-accurate models for virtual platforms on the same day that ARM announced that they were selling their cycle-accurate simulators and associated tool chain to Carbon Technology. That makes one wonder where cycle-accuracy is going, or whether it is a valid idea at all… is ARM right or am I right, or are we both right since we are talking about different things?
I have another opinion piece published over at SCDsource.com. The title, “Why virtual platforms need cycle-accurate models“, was their creation, not mine, and I think it is a little bit off the main message of the piece.The follow-up discussion is also fairly interesting.
The key thing that I want to get across is that we need virtual platforms where we can spend most of our time executing in a fast, not-very-detailed mode to get the software somewhere interesting. Once we get to the interesting spot, we can then switch to more detailed models to get detailed information about the software behavior and especially its low-level timing. Getting to that point in detailed mode is impossible since it would take too much time.
See an upcoming post for more on how to get at the cycle-accurate models – this was just to point out that that the article is there, for symmetry with previous posts about my articles popping up in places.
Only half an hour ago, the embargoes lifted. Freescale announced its new QorIQ series of multicore (and some single- and dual-core) processors. For the top-end of that line, the P4080, Freescale and Virtutech (where I work, remember) have developed a virtual platform solution to help Freescale customers get to working products faster. The virtual platform is available now, and is already running several operating systems including VxWorks, QNX, and a variety of Linuxes. Apart from the fairly large scale of this SoC, the really new part of the virtual platform is the so-called Hybrid solution, where the fast models are combined with detailed models from Freescale themselves. This creates a cycle-level detailed model with validated timing, “from the source” — but without the performance issues of having to run everything at great level of detail. Rather, you use the fast model to steer the simulation of a workload to an interesting spot, and then turn up the level of detail then and there. You can also select which components of the chip are actually detailed and which parts are modeled with the fast functional models, avoiding the incredible slow-down of running and entire virtual platform at a great level of detail.
If you happen to be at the FTF in Orlando, do come by and look at the demos!
I have been involved in this work for the past year, and it is wonderful to finally see it coming out and be able to talk about it.
SystemC TLM-2.0 has just been released, and on the heels of that everyone in the EDA world is announcing various varieties of support. TLM-2.0-compliant models, tools that can run TLM-2.0 models, and existing modeling frameworks that are being updated to comply with the TLM-2.0 standard. All of this feeds a general feeling that the so-called Electronic System Level design market (according to Frank Schirrmeister of Synopsys, the term was coined by Gary Smith) is finally reaching a level of maturity where there is hope to grow the market by standards. This is something that has to happen, but it seems to be getting hijacked by a certain part of the market addressing the needs of a certain set of users.
There is more to virtual platforms than ESL. Much more. Remember the pure software people.
Edit: Maybe it is more correct to say “there is more to virtual platforms than SoC”, as that is what several very smart comments to this post has said. ESL is not necessarily tied to SoC, it is in theory at least a broader term. But currently, most tools retain an SoC focus.
Being a bit of a computer history buff, I am often struck by how most key concepts and ideas in computer science and computer architecture were all invented in some form or the other before 1970. And commonly by IBM. This goes for caches, virtual memory, pipelining, out-of-order execution, virtual machines, operating systems, multitasking, byte-code machines, etc. Even so, I have found a quite extraordinary example of this that actually surprised me in its range of modern techniques employed. This is a follow-up to a previous post, after having actually digested the paper I talked about earlier.
On Tuesday next week, I will be presenting at the Power Architecture Conference (PAC) in München, Germany. The topics will be multicore debug using virtual hardware, and the new Simics Accelerator technology. Especially Simics Accelerator is pretty interesting technology.
It is a simple idea, using multiple host cores to run a virtual platform, with fairly amazing results. Now, using a single computer we can run fairly incredible simulations that were the realm of pure fantasy just a few years ago. We also got a nice new little box to demonstrate it with, an eight-core Dell with 16 GB of RAM. With 64-bit Linux, this thing makes my Core 2 Duo laptop with 32-bit Vista look like yesteryear’s snail… And creates that giggling feeling that a really impressive new toy brings up in even the most grown up boys. Booting a 16-machine network of PowerPC boards was so fast it was not demoworthy. I think we have to up the ante to some 100 target machines to make it interesting, and I have no doubt that a combination of multithreading and idle-loop optimization will make that thing be usefully interactive from the target command lines. There are many other wild things we could try on that demo box, once it gets back from the Power Architecture Conferences tour.
By means of a trip down virtualization history, I found a real gem in 1969 paper called A program simulator by partial interpretation, by Kazuhiro Fuchi, Hozumi Tanaka, Yuriko Manago, Toshitsugu Yuba of the Japanese Government Electrotechnical Laboratory. It was published at the second symposium on Operating systems principles (SOSP) in 1969. It describes a system where regular target instructions are directly interpreted, and any privileged instructions are trapped and simulated. Very similar to how VmWare does it for x86, or any other modern virtualization solution.
Now the ESC SV 2008 is over. I really enjoyed going to the show this year, and presenting on simulation for embedded systems. The topic has to be heating up, I had some fifty people listen to the talk, which is really very good. Hope that they learnt how to build good transaction-level hardware models, and have some idea on how to apply this to their own projects. Hopefully, I can come back next year for the ESC 2009 (update: this did not happen) and do it again (even though the recent travel trouble makes it a less attractive idea to fly back here right now…).
It must have been Google Alerts that send me a link to the HOTOS 2007 (Hot Topics in Operating Systems) paper by Tal Garfinkel, Keith Adams, Andrew Warfield, and Jason Franklin called Compatibility is not Transparency: VMM Detection Myths and Realities. This paper is slightly less than a year old today, so it is old by blog standards and quite recent by research paper standards. It deals with the interesting problem of whether a virtual machine can be made undetectable by software running on it — and software that is trying to detect it. Their conclusion is that it is not feasible, and I agree with that. The reason WHY that is the case can use some more discussion, though… and here is my take on that issue from a Simics/embedded systems virtualization perspective.
Power.org publishes a quarterly newsletter over at www.power.org/news/newsletter. In the April 2008 issue it features a short article by me introducing Simics 4.0 and Simics Accelerator, the way in which Virtutech Simics takes advantage of multicore processors to simulate large target systems using a multithreaded simulator.
I have an article at SCDSource.com, about how virtual platform creation needs to become more efficient. And the Virtutech current solution to that issue, DML, Device Modeling Language. There is no need to repeat the contents here, just head over to www.scdsource.com/article.php?id=166 to read it! I really think that DML has something to contribute in the world of virtual platforms. We need to find ways to be more efficient about how to create models, and that means creating a better programming language.
So what is SCDSource? Is is a quite good news and analysis site about the electronics industry, EDA, virtual platforms, and other themes close to my heart. SCDSource was started in October 2007, and have produced a series of good and interesting articles since. They tend to actually write articles and not just repeat press releases, and to report form interesting panels at events like DATE, ESC, and Multicore Expo.
ArsTechnica is running a history of the Amiga, and in part 3, “The first prototype” they describe a really interesting “simulation” solution for the custom chips in the first Amiga. This is in 1982-83, and there are no VHDL or Verilog simulators, nor any other EDA tools as we know them today. Even if they were, the Amiga company would not have been able to afford them. So in order to test their design, the Amiga engineers built chip replicas using breadboards and discrete logic chips. All in all, 7200 chips and a very large numbers of wires. Quite fascinating stuff, and they did manage to interface the main 68000 CPU to the breadboards and get a fully functional if a bit slow simulation of a complete Amiga computer with all its unique custom chips.
RTiS 2007 just took place in Västerås, Sweden. It is a biannual event where Swedish real-time research (and that really means embedded in general these days) presents new results and summarizes results from the past two years. For someone who has worked in the field for ten years, it really feels like a gathering of friends and old acquaintances. And always some fresh new faces. Due to a scheduling conflict, I was only able to make it to day one of two.
I presented a short summary of a paper I and a colleague at Virtutech wrote last year together with Ericsson and TietoEnator, on the Simics-based simulator for the Ericsson CPP system (see the publications page for 2006 and soon for 2007). I also presented the Simics tool and demoed it in the demo session. Overall, nice to be talking to the mixed academic-industrial audience.